KSV65BS1

Product Characteristics£º

1¡¢Thanks to a control valve for suction in a screw compressor,it is possible to operate the compressor seamlessly by using different valve types.
2¡¢ KSV 65BS1 role is to secure and control air suction by implementing the Buttery Control Disk and Swing check Valve.
3¡¢ KSV 65BS1 has a special type of attachable Venting Valve (KV V-BS1),which include Servo-Cylinder(KSV)and Solenold Valve.
4¡¢ Servo-Cylinder(KSV)in piston type device that operates by softly inserted orificeat the nozzle assuring good durability.
5¡¢ Verting Valve(KV V-BS1)has clean pipe mounting the Solenoid Valve to the mainbody.During unloading process it sends some portions of venting air to Air End with the purpose of Air End noise reduction.

KSV 65BS1	KSV85BS1	KSV120BS1	KSV 160V SC	KSV 160V £º

Caution:

1¡¢Do not ever attempt to dissemble a body during pressurized.
2¡¢ The air compressor and the suction control valve must be decompressed before dismantle the valve from the air compressor.

Examples:

1¡¢Start-up:Solenoid Valve S(NC)with Venting Valve is being closed.The Control Disc is set-up in the idle position and the oil separateor is vented by the venting valve V(NO)
2¡¢Full load :Solenold Valve S(NC)with a venting Valve is opened.The Venting ValveV(NO)is closed and the Control Disc for the Suction Valve(KSV)is opened by the Servo Cylinder(KSC)
3¡¢Idlling : Solenold Valve S(NC)with Venting Valve is closed the Control Disc of the KSV is also closed by the KSC
4¡¢Shut-down,stand-by:The control Disc and Check Flap of the KSV are closed.The oil separator is vented vin the venting valve V(NO)
5¡¢Capacity control:Additionally there is a need for proportioanal controller formonitoring capacity.The KSC Control Disc position within the range between full and 70%load should be partly closed in accordance to the relevant pressure at the Proportional Controller inlet.

Components:

1. Suction Valve Housing Assembly
2. Servo-Cylinder Assembly
3. Venting Valve Assembly
4. Solenoid Valve Assembly

Specifications£º